Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Brianharding
Observer

‎22-05-2024 9:51

Changing router gateway address

I’ve just installed hub2, the gateway address is 192.168.0.1 and the connected devices obviously attach as 192.168.0.xx. How can I change the addressing scheme so that everything is 192.168.1.xx.

 

thanks

0
1 ACCEPTED SOLUTION
seebee
Scholar

‎22-05-2024 11:17 - edited ‎22-05-2024 11:20

If you log into your Hub2, choose "Advanced" at the top, then "LAN IP setup" should show the settings for the LAN address range. eg NOW TV Hub Two > LAN IP Setup 

I assume where the third octet is "0" in the three settings, change that to "1" and apply.

(When the router renumbers, you'll have to refresh the DHCP address on your client/reboot it, so it picks up the change and you can connect again)

View solution in original post

0
1 REPLY 1
seebee
Scholar

‎22-05-2024 11:17 - edited ‎22-05-2024 11:20

If you log into your Hub2, choose "Advanced" at the top, then "LAN IP setup" should show the settings for the LAN address range. eg NOW TV Hub Two > LAN IP Setup 

I assume where the third octet is "0" in the three settings, change that to "1" and apply.

(When the router renumbers, you'll have to refresh the DHCP address on your client/reboot it, so it picks up the change and you can connect again)

0