12-07-2016 16:13
Hi all, just bought a smart box and registered. Set up went well and all seems working, except the picture on my TV ''shaking'' up and down slightly. Anyone !!!!!!
28-08-2016 23:48
Hi,
i have exactly the same problem on a Samsug, rang tech help and still awaiting a response. I'm convinced it's the box or update.
when my kit arrived it was 3 days before my broadband was installed. I thought I'd try and get the free to ai channels not thinking it would need a connection.
why am I telling you this? Because the menu appeared stable and sound but I could not watch tc as the boot up of the NowTV Smart box insisted on getting the firmware update. But the menu/instructions/Now TV splash screen were all stable.
A few days later my broadband was connected the menu etc was stable on first boot up but as soon as the software update was installed. Wobbles everywhere, from splash screen to menu to programmes. This is definitely in my view an incompatibility of the firmware/box combo and Samsung. I would bet it's a screen refresh/frequency issue.
any help please my tv is now unwatchable and I have no idea how or if it will be fixed.
30-08-2016 18:36
30-08-2016 21:04 - edited 30-08-2016 21:08
Perhaps someone ought to tell tech support on the phone! I rang today explained the issue and referred to the community thread. I like you expect it is firmware and/frequency/refresh rate or something. The solution they opted for is to send a new box. I don't hold much hope out. On the basis as soon as it installs it will insist on getting the latest update. I have to assume a patch will come down the wire soon. But tbh I've stopped looking at the tv altogether.
31-08-2016 11:57
Hi @Anonymous User
Would it be possible to give me the model number of your TV so I can also pass this onto the tech guy's who are looking at this issue ?
Thanks
Andy
31-08-2016 16:38
Just had an update on this issue :
Roku ( who make our boxes) have replicated this issue and identified the root cause.
They are currently doing further integration tests on a fix before it is released.
Once I hear more I will update you
Thanks
Andy
02-09-2016 17:26
Hi,
just to confirm Now sent me a replacement which just arrived. I guess before the issue was identified properly.
On install the screen was rock steady and clear right up to the point the software update was installed and the box rebooted.
ADid tonal proof if any were needed that the software release has caused the issue and the previous firmware was compatible with my Samsung TV.
any idea how long it will be before we can expect a fix so I can actually use my TV?
05-09-2016 14:09
Hi @Anonymous User,
No further update since my post last week im afraid.
As soon as I hear more I will update you all.
Thanks
Andy
10-09-2016 17:36
Hi Andy
Seems the smart Now TV box should be sold with an adviserory about this issue considering i've just bought one today and am experiencing the same problems which you've seemed to know about for a while at least until you've fix it otherwise its just a waste of money like mine is!
Regards Tom
10-09-2016 17:39
@Anonymous User wrote:Seems the smart Now TV box should be sold with an adviserory about this issue considering i've just bought one today and am experiencing the same problems which you've seemed to know about for a while at least until you've fix it otherwise its just a waste of money like mine is!
Hi @Anonymous User,
It would help if you told us the make and model number of your television?
05-09-2016 22:03
Exactly my experience. TV was fine until the software update (I'm using a Samsung US TV that clearly doesn't support 60hz!)
My older TV seems to support both and is fine after the sw update.