Good spot there, first I've heard of the Hub 2.
The NOW TV Hub is basically a rebadged Sky SR102 single-band 802.11n router with four 100MB LAN ports, there's plenty of reviews of that on the web if you want to read up.
The Hub 2 looks like it's a rebadged Sky Q Hub, if so it should be a dual-band 802.11ac router with two 1GB LAN ports. I don't know for sure if the NOW TV Hub 2 over all these features but if it does then it will be a much welcome upgrade for customers.
I'll see if I can find out any more.
" if so it should be a dual-band 802.11ac router with two 1GB LAN ports. I don't know for sure if the NOW TV Hub 2 over all these features but if it does then it will be a much welcome upgrade for customers."
The above is correct 2.4/5Ghz which you can have mixed mode or split with two 1GB ports
My hub 1 failed and they replaced it (free of charge) with the hub 2.
It's a much slimmer router, similar to the current NowTV device and is more suitable for horizonal sitting, than the previous upright 'brick' standing.
There are no longer any illuminted 'happy faces' on the front, just 3 tiny pin LED's for on, internet and wireless and thankfully, not those hi-brite type either.
I've not tested its 802.11ac speed as oddly, I found the hub2 was faster on 802.11g than it was on 802.11n! Weird. Could be my conditions though. But in theory 5GHZ should be faster albeit not able to penetrate walls as easily as 2.4ghz and without the range. If I can find my AC1600 driver and a flux capacitor 😉 I'll see if I can connect and figure out its max speed.
It's default settings were fine 2.4GHZ (40mhz channel 6) and 5GHZ (80mhz channel 36) with 2.4hz and 5ghz syncronised. Although I am only using the 2.4ghz at the moment.
As we all know, the HUB 1 was notorius for those weekly wireless disconnections - for no apparent reason - whereas the hub 2 seems more stable. Up to now anyway.
It has two yellow gigabit ports, which might seem a bit mean. But you can always connect one to connect to a gigabit switch for more outputs and the switch will do all the heavy lifting anyway.
I didn't notice too much difference in the menues; maybe a nicer layout and colour ?? The only thing I did was switch off UpNp for security reasons, but it worked right away, once I put the new password into every every device.
Spoke too soon.
I think I found a bug in HUB2. If an IP4 address is reserved to a MAC ID in the advanced - LAN IP and say you have more than 2 devices, then upon reboot, the HUB can often ignore your IP4 /MAC reservation requests and just randomly allocate an IP4 address from the DCHP range, which is not the behaviour you want. I swapped two MAC ID IP addresses and MAC ID's swapped devices (what!?) at least according to the router. I guess I need a lie down before doing more testing.
@Anonymous User Welcome to the forum. NOW TV don't provide details for using third-party routers so you'd need to use the NOW TV Hub 2 however it's a good router with excellent wifi range, I don't think you'll have any problems.