First look and see if the changes you want to make can be made in Broadband Buddy, which is easier and safer.
But if not:-
Open a new web browser window.
In the address bar, type 192.168.0.1 and press Enter. This will bring up the settings screen for your Hub.
Select thetab that gives the services you want to change. Enter the username admin and password nowtv (in lowercase) when prompted, unless you have changed these from the defaults, in which case use the new values you have set.
If the Hub no longer works properly after your changes, you’ll need to Reset it.
You can do this by pressing in the reset button at the back of the router for a good 10-15 seconds and you should then be able to use the above details again. If you do reset the hub bear in mind you'll lose any changes you've already made to the hub, and the wireless network name and password will default back to the ones on the sticker.
If my posting answered your question, please click ‘Accept Answer’ If you liked my posting, please click ‘Thanks’. If you disagree with my posting, say so below, and I will see if I need to mend my ways 🙂