12-04-2022 12:05
I have a hub 2 and trying to set up my new cctv system. The router doesn't seem to be seeing my net gear POE box. I've tried with other wires and the same issue. I've looked on the router settings and can't find anything either. Is the Hub2 not compatible with a POE? Is it a hardware issue more than a software/ setting issue. Any ideas much appreciated as I'm stumped as to what it could be.
12-04-2022 12:17
Hi @Anonymous User
Are you using the camera over Ethernet ?
If so, a bit of a long shot go into the NOW Hub 2 webpage settings and under Ethernet change from Gigabit to Fast Ethernet instead.
Worth a go if you haven't tried it already.
12-04-2022 12:24
Hi yes it's for a camera and yes I've tried that as read other comments that said the same. Thank you for replying though.
12-04-2022 12:18
Ethernet switches are essentially dumb and should just be plug and play. Have you tested the switch on another router? Do the ethernet ports on your Hub work with other devices? This should help to identify where the issue lies.
12-04-2022 12:27
Unfortunately don't have anything else to plug in to hbe ethanet slots. My netgear Poe is flashing green which means there is a error on the router side as tried with two cables and both flash instead of being a solid green light on the port of the Poe
12-04-2022 12:54
What model of Netgear box do you have? Presumably you have a separate power supply to the switch.
The Hub2 can't supply PoE, as far as I know, so it's up to the switch to inject it.
12-04-2022 13:35
I have a netgear tp link sf1005p. Which comes with its own power supply to the box. @Anonymous User
12-04-2022 21:41
I've not worked with PoE equipment, but a flashing indicator on a switch port usually signifies the passage of data, it's not a fault. So the LH LEDs are activity and the RH are PoE error. As the Now router is unlikely to be supplying PoE perhaps it is to be expected to show as error if used on one of those ports.
If you put the Now router into port 5 of the switch and the cameras in 1-4 does it work?
12-04-2022 21:50
Hi
No it still doesn't work. The reason I say it flashes as on the box it says LH port light. solid green = light 10/100mbps. Blink = Act RH on the same point solid green = poe powered flashing green =poe fault.
When plugged in cable from camera to PoE. Solid green RH. Cable from PoE to router LH Blinking.
The router has solid orange on LH and flashing green on RH.
So not to sure what the issue is still not working.
@Anonymous User
12-04-2022 21:56
Have you been able able to test if the ports on the Now hub are working with another device such as a PC?