13-06-2017 8:01
For some reason Now tends to buffer or go fuzzy at certain times of the day.
I would like to connect to my BT hub using the Ethernet cable that goes to my YouView and splitting it to my Now box as well using a 1 in 2 out splitter. Would this work? and what splitter, I don't want to press buttons each time I change from one to the other?
Solved! Go to Solution.
13-06-2017 9:33
13-06-2017 9:33
13-06-2017 10:02
Yes, I'm watching the Lions match through Now, but can I use a splitter to connect both please?
13-06-2017 10:12
13-06-2017 10:27
Yes, I've got that, all I want to do is connect both Now and YouView to my tv , couldn't care about watching Now through YouView -- is it possible to use a splitter please? If so which one would you suggest?
13-06-2017 10:23
@Anonymous User
Welcome to the forum. Just to check I've got things right, you have a YouView box and a NOW TV Box, the YouView box is connected by Ethernet and the NOW TV box by wifi?
If so there are no 'splitters' for Ethernet along the lines of those little splitters you get for telephone cables or aerial cables. You can buy a simple Ethernet switch for a few quid, which is essentially doing the same job, but they need to be powered.
However if your YouView box is already connected to your BT Hub via Ethernet then I'm guessing they're all fairly close to each other so if there's a spare port on the Hub just connect the NOW TV box direct to the hub with another Ethernet cable.
Alternately if you suspect poor wifi reception is to blame, experimenting with the position of the box, wifi channel of the router, choice of 2.4GHz/5GHz etc may help.
13-06-2017 10:29
Andy,
Thanks got there,-just what I wanted.