15-01-2017 16:41
Is there / can there be a list of secret screens in one place, possibly stickied? Maybe referred to as diagnostic screens instead. It's frustrating searching the whole forum and not know if there's another screen which might provide better info.
Solved! Go to Solution.
17-01-2017 16:34
@Anonymous User
HOMEx5 FFx3 RWx2.............Factory reset, update software, info (do not change server settings)
HOMEx5UP DOWN UP DOWN UP..........Wi-Fi Secret Screen
HOMEx5 FF PLAY REW PLAY FF.....Platform Secret Screen, system operations menu (reboot, sleep, pings, screen resolutions), IP info, wireless secret screen link
HOMEx5 REWx3 FFx2.............Bit Rate Override menu (n/a for NOW TV)
HOMEx3 UPx2 RIGHT LEFT RIGHT LEFT RIGHT …..Installed Channels Info
HOMEx3 UPx2 LEFT RIGHT LEFT RIGHT LEFT …..Developer Settings Screen
HOMEx5 RIGHT LEFT RIGHT LEFT RIGHT……….Network Settings Screen alternate route
HOMEx5 UP REWx2 FFx2..........Reboots Device
I've omitted one secret screen that shouldn't be tampered with at all. Hope that helps.
06-09-2018 7:24
Secret screen is working... but you are still unable to access diagnostics
05-03-2019 13:28
Hi, I've a problem, I cannot access to developer setting using Home, Home, Home, Up, Up, Right, Left, Right, Left, Right, could someone tell me why?
05-03-2019 13:58 - edited 05-03-2019 13:58
@Anonymous User As @Andy Pointed out in his post (three above yours) access to the developer screens was removed last year. Fully-fledged Roku devices still can, but not the Now TV badged versions.
12-06-2019 14:28
Hi,
Thanks for the info.
I have seen posted in a few places this info but wondered if there was a way to force the update server to be 'beta' as it seems that after resetting my white box then after entering the wifi code it ends up in a booting loop which seems to be relating to the box trying to update or failing to apply an update. I suspect that the latest update it's trying to install is not compatible or too much for my old white box so would be happy to stick with a working box running older software like 6(?) rather than a brick not running 7.
Any advice to stop me pulling out more (grey) hair would be appreciated.
Thanks.
18-01-2017 8:26
@Andy @Anonymous User
There's also a screen that gives access to more info about the in-built Freeview tuner:
Home x4 Up Right Down Up Left Right
06-07-2017 22:17
It seems as though the developer mode screen is no longer accessible (I know that and the channels sequence are the wrong way around).
Does anyone know if it's moved?
Thanks
06-07-2017 22:21
@Anonymous User Yeah unfortunately NOW TV have removed the ability to use developer mode a while back so you can't access that anymore.
06-07-2017 22:25
Shame, I was hoping to have a play. I guess I'll have to buy a proper Roku
19-03-2018 19:35
19-03-2018 23:03
@Anonymous User The trick to entering the sequence is to do it fairly quickly without pausing. Press the keys as fast as you can name them - any pause will stop the sequence. Also, I find that looking at the screen while entering the sequence slows me down and I have to start again. Hope that helps.